Click on the image to check the artwork
Â
Huawei HG8310M has a 100M network port version and a Gigabit network port version. The difference lies in the label on the back. The one with the CLASS C+ logo is the Gigabit network port version.
Advantages: 1. Simple and elegant appearance 2. Good stability, usually connected to the Internet 3. Small and exquisite 4. Fast Internet speed, no lag at all when playing games.
Disadvantages: 1. Instead of using WIFI, it is not as convenient as the all-in-one optical modem machine, and you have to buy another wireless router.
Â
|
Model |
8310M Fiber ONU (Custom LOGO) |
|
Fibre port |
1 GPON interface, SC single-mode/single-fiber, Downstream rate 2.5Gbps, Upstream rate 1.25Gbps |
|
Wavelength |
Tx 1310nm, Rx 1490nm |
|
Fibre interface |
SC/PC SC/APC |
|
RX sensitivity |
<-28dBm (1490nm) |
|
WLAN |
IEEE802.11b/g/n, 300Mbps, a built-in antenna |
|
LAN |
1*10/100/1000Mbps adaptive Ethernet ports, full/half-duplex, RJ45 interface |
|
Throughput |
Throughput can reach 900Mbps or more |
|
DC power |
12V 1A, external AC-DC power adapter |
|
Button |
Reset, power |
|
Power |
≤8W |
|
Operation |
Working temperature: -5-+55℃ working humidity: 10-90% (non-condensation) |
|
Storage |
Storage temperature: -30℃-+60℃ storage humidity: 10-90% (non-condensation) |
|
Dimension |
130*105*30mm (length*width*height) |
|
Net weight |
≤0.2Kg |
Â
01 - First up is our original power adapter. Here you can see the model number, trial voltage and current, manufacturer information and service life of the power adapter. It is important to note here that the original power adapter must be used to connect the optical modem, otherwise the optical modem will be easily damaged.
02 - Plug the power socket of the original power adapter into the power socket, and plug the round plug at the other end into the power socket of the Huawei fiber optic ONU. Now the power indicator light is on and the fault indicator light is on red, indicating that the fiber optic signal is unavailable.
03 - Now remove the protective cover of the optical fiber interface (note that the optical fiber interface must be kept clean and free of dust, otherwise it will affect the signal quality), and then insert it into the optical fiber socket of the optical fiber ONU.
04 - Then plug one end of the RJ-45 network cable with a crystal head into the intranet socket of the fiber optic modem, and the other end into the network cable socket of the computer. The connection is now complete.
05- Let's take a look at the power indicator light. The power indicator light displays normally, and the fiber optic indicator light also flashes, indicating that there is a signal.
Â
Â
1. Plug the output line of the broadband modem into the WAN port of the broadband router, and use a straight-through twisted pair network cable to connect the router LAN port to the computer network card.
2. Turn on the power of the broadband modem and router.
3. In the address bar of the computer's IE browser window, enter 192.168.1.1 and hit "Go" to open a dialog box asking for a user name and password.
4. Enter "admin" in the user name and password text boxes respectively, confirm, and open the configuration interface of the device.
5. In the routing network connection wizard, select "WAN port" and "PPPOE protocol" (be careful not to select dynamic or static), then enter the telecom broadband account and password, and select: automatic dialing in the advanced options.
6. After the configuration is completed, turn off the power of the router and then restart it.
Â
Â
Q: How to set up the router on Huawei 8310M Fiber ONU?
The method of setting up the connection between the router and Huawei HG8310M broadband modem is as follows:
1. Plug the output line of the broadband modem into the WAN port of the broadband router, and use a straight-through twisted pair network cable to connect the router LAN port to the computer network card.
2. Turn on the power of the broadband modem and router.
3. In the address bar of the computer's IE browser window, enter 192.168.1.1 and hit "Go" to open a dialog box asking for a user name and password.
4. Enter "admin" in the user name and password text boxes respectively, confirm, and open the configuration interface of the device.
5. In the routing network connection wizard, select "WAN port" and "PPPOE protocol" (be careful not to select dynamic or static), then enter the telecom broadband account and password, and select: automatic dialing in the advanced options.
6. After the configuration is completed, turn off the power of the router and then restart it.
Â
Q: Huawei 8310M Fiber ONU maximum bandwidth?
The maximum bandwidth of Huawei hg8310m is 1000M. The interface description of Huawei 8310m optical modem is 1GE. Theoretically, the maximum supported Gigabit optical fiber rate is based on the barrel principle and is determined by the lowest rate and bandwidth supported by the equipment on the link.
Â
For more details of 8310M Fiber ONU, please feel free to contact us!!!
Â
http://www.fibertelcom.com/